ABB 800xA Property Transfer Setup Reading From Harmony

by No comment(s) , , , , , , ,
ABB 800xA Infi90

ABB 800xA Infi90

This is a primer on how to read Harmony tag into 800xA and write it out to the PLC via PLC Connect.

Open 800xA (Engineeing Workplace) and navigate to Control Structure.

Xybernetics ABB 800xA - Property Transfer Setup Read From Harmony

And add tag with “Property Transfer Definition” aspects. In our example, we are reading value Harmony tag called “TY_2000;OUT/SIG” into the 800xA tag called TEST. And it is being read at 13000 milliseconds.

The Harmony value from tag “TY_2000:OUT/SIG” will get written to the PLC tag “DATA_DINT[1].11” via the 800xA tag “TEST”.

Xybernetics ABB 800xA - Property Transfer Setup Read From Harmony

I hope that helps. Cheers!

n1849778
About the
I am a software developer in Calgary, Alberta, Canada with passion in getting my fingers in any new technology. I started software development when I was 10 years old and have never looked back. Now with well over 35 years of software development, I wanted to share some of these key knowledge with the people of the world in the wide web.