In this vlog we will capture everything about the Controller Logic Status module.

The Controller Logic Status module reads the Ladder Logic Application status in the RAM and FLASH memory and assigns it to two input registers. The input registers are updated continuously with the current application status.

The table below highlights what each of the 2 two registers value denotes.

Xybernetics SCADAPack - Controller Logic Status

To setup your Telepace project to read the Controller Logic Status, you will have to include the Controller Logic Status module (as shown below).

Xybernetics SCADAPack - Controller Logic Status
Xybernetics SCADAPack - Controller Logic Status

After that, you will have to assign the “AI Start Register”

Xybernetics SCADAPack - Controller Logic Status